4eb69d6af5
Fix restore ( #4655 )
...
* ALWAYS_OFF for fan
* ALWAYS_OFF for light
* ALWAYS_OFF for switch
2023-04-12 21:28:02 +00:00
0547f2a931
Add KSZ8081 support. ( #4668 )
...
Co-authored-by: Your Name <you@example.com >
2023-04-12 21:22:08 +00:00
b5fbe0b145
Fix cut-off on 2.13" waveshare/ttgo epaper displays ( #4255 )
...
The controller of the 2.13" waveshare/ttgo epaper displays operates with a 128x250 buffer,
while only 122x250 pixels are shown. While this can be ignored for rotations 0/270°,
with roations 90/180°, 6 pixels are cut-off from the top or left edge.
This change introduces a distinction between object width and controller width,
resulting in pixel-perfect rotations.
2023-04-12 21:19:52 +00:00
443c3c2a56
Fix graph limits for negative values and other corner cases ( #4253 )
...
Fix lower graph limit for negative values by rounding down instead of truncating.
Consistently handle the corner cases: empty trace, min=max (e.g. single value)
by drawing the grid lines for a single grid division.
2023-04-12 21:18:09 +00:00
d75daa9644
Add always trigger stop ( #4249 )
...
* feat: Add manual control config override 1/3
* feat: Add manual control config override 2/3
* feat: Add manual control config override 3/3
* No magical number is better
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com >
---------
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com >
2023-04-12 21:16:44 +00:00
7963abb27a
Fix BedJet setup priority [fixes esphome/issues#3807] ( #4677 )
...
There is a race condition where a BedJet unit previously had its BLE
"notify" flag enabled, and it continues to broadcast these notify
packets even after the ESP32 (and BLEClient) goes away, such as during
a crash or unplugging power.
BLEClient::setup_priority=AFTER_BLUETOOTH, while
BedJetHub::setup_priority=AFTER_WIFI. When the ESP32 starts back up
again, BLEClient::setup() happens first and will start receiving the
BLE notify packets almost immediately. Since we register the BLEClient
child from codegen, BedJetHub is registered as a child already by this
point, so BLEClient dispatches the notify status packet (and other gatt
events) to the BedJetHub handler, even though BedJetHub::setup() has
not been called yet.
We initialize BedJetHub::codec_ in setup(), so if BLEClient starts
dispatching gatt events before setup() is called, then codec_ will not
be initialized yet. This causes BedJetHub's gatt notify handler to call
`this->codec_->decode_notify()` on an uninitialized null pointer. Since
invoking a method does not have to dereference the pointer, that method
invocation is allowed; but later trying to access memory on that
instance results in a StoreProhibited panic.
Changing the BedJetHub's setup_priority to BLUETOOTH causes it to be
setup before BLEClient, so that by the time BLEClient starts to receive
BLE packets, BedJetHub is ready to receive them.
2023-04-12 08:33:15 +00:00
0b9e8fda34
Fix pin schema for i2s microphone ( #4680 )
2023-04-12 08:25:19 +00:00
a3cacc0c8b
Add support for SSD1306 72x40 displays ( #4659 )
...
* add SSD1306 72x40
* fix indents
* fix clang style
2023-04-12 04:02:29 +00:00
5a4840f641
Fix some NFC/PN532 crashes ( #4678 )
...
* Add + use some constants, fix some crashes
* Fix PN532 crashes
2023-04-12 02:29:06 +00:00
3d7d689040
Fix ESP32 SPI hardware assignment in Arduino fw ( #4669 )
2023-04-12 01:38:41 +00:00
b60c08dd28
Add push to talk voice assistant ( #4648 )
...
* Add push to talk voice assistant
* Refactor most code into voice_assistant
* Make voice_assistant the component and remove push_to_talk (can be done in yaml)
* Fix component setup
* Always AF_INET to match serverside
* Fix microphone and media player co-existence
* Format
* Update codeowners
* Update test file
* Fix endifs
* nullptr not NULL
* clang-tidy
* Format
* fixup: Add VA event data
* Generate proto
* Parse and log events
* Add default to switch
* Fix
* Add mic/va to test5
2023-04-11 23:45:10 +00:00
80bc567c31
Bump pytest from 7.2.2 to 7.3.0 ( #4673 )
...
Bumps [pytest](https://github.com/pytest-dev/pytest ) from 7.2.2 to 7.3.0.
- [Release notes](https://github.com/pytest-dev/pytest/releases )
- [Changelog](https://github.com/pytest-dev/pytest/blob/main/CHANGELOG.rst )
- [Commits](https://github.com/pytest-dev/pytest/compare/7.2.2...7.3.0 )
---
updated-dependencies:
- dependency-name: pytest
dependency-type: direct:production
update-type: version-update:semver-minor
...
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2023-04-10 22:29:40 +00:00
888ac2e180
Bump zeroconf from 0.47.4 to 0.56.0 ( #4674 )
...
Bumps [zeroconf](https://github.com/python-zeroconf/python-zeroconf ) from 0.47.4 to 0.56.0.
- [Release notes](https://github.com/python-zeroconf/python-zeroconf/releases )
- [Changelog](https://github.com/python-zeroconf/python-zeroconf/blob/master/CHANGELOG.md )
- [Commits](https://github.com/python-zeroconf/python-zeroconf/compare/0.47.4...0.56.0 )
---
updated-dependencies:
- dependency-name: zeroconf
dependency-type: direct:production
update-type: version-update:semver-minor
...
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2023-04-10 22:29:22 +00:00
421ebcc8b2
use PRIx macros for printing u32/i32 ints ( #4671 )
...
This fix compilation issues with the latest esp-idf.
2023-04-10 22:20:02 +00:00
b56fa8c50a
Bump black from 23.1.0 to 23.3.0 ( #4635 )
...
* Bump black from 23.1.0 to 23.3.0
Bumps [black](https://github.com/psf/black ) from 23.1.0 to 23.3.0.
- [Release notes](https://github.com/psf/black/releases )
- [Changelog](https://github.com/psf/black/blob/main/CHANGES.md )
- [Commits](https://github.com/psf/black/compare/23.1.0...23.3.0 )
---
updated-dependencies:
- dependency-name: black
dependency-type: direct:production
update-type: version-update:semver-minor
...
Signed-off-by: dependabot[bot] <support@github.com >
* Update black in pre-commit
---------
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com >
2023-04-04 02:34:36 +00:00
42401775e1
Added in mmc5603 code ( #4175 )
...
* added in mmc5603 code
* added in codeowner
* fix linter errors
* whitespace linter errors
* added codeowner
* clang format
* remove clang format from python code
* fix whitespace
* add tests
* fix test
* make requested edits
* remove status manipulation
---------
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com >
2023-04-04 02:34:14 +00:00
9c9bc58c16
Bump pylint from 2.16.4 to 2.17.2 ( #4650 )
...
* Bump pylint from 2.16.4 to 2.17.2
Bumps [pylint](https://github.com/PyCQA/pylint ) from 2.16.4 to 2.17.2.
- [Release notes](https://github.com/PyCQA/pylint/releases )
- [Commits](https://github.com/PyCQA/pylint/compare/v2.16.4...v2.17.2 )
---
updated-dependencies:
- dependency-name: pylint
dependency-type: direct:production
update-type: version-update:semver-minor
...
Signed-off-by: dependabot[bot] <support@github.com >
* Add return 0 to run_miniterm
---------
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com >
2023-04-03 23:55:00 +00:00
fbc129cccc
Version retry (fixes esphome/issues#3823) ( #4651 )
2023-04-03 22:23:31 +00:00
99638190cb
VSCode / devcontainer updates ( #4647 )
2023-04-03 19:44:46 +00:00
d78e9e6aa8
Number step not optional ( #4649 )
...
* Number step not optional
* Update __init__.py
* Update __init__.py
---------
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com >
2023-04-03 19:31:11 +00:00
878155a03d
Log calibration results at level INFO ( #4240 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com >
2023-03-31 09:05:28 +00:00
9922eb83e2
Support advanced UART customization ( #4465 )
...
* Add methods to get hardware uart details.
* Fix `setRxBufferSize` error.
---------
Co-authored-by: Your Name <you@example.com >
2023-03-31 04:30:24 +00:00
79f861f012
Avoid sensor padding. ( #4638 )
...
Co-authored-by: Your Name <you@example.com >
2023-03-31 04:29:17 +00:00
4faa9d109e
entity_base avoid padding bytes. ( #4637 )
...
Co-authored-by: Your Name <you@example.com >
2023-03-31 04:28:49 +00:00
28534ecc61
Binary map bugfixes ( #4636 )
...
* limit configuration to 64 binary sensors to match code limitation
* remove superfluous debug logging
* improve state publishing logic eliminating NAN being sent on boot in certain cases
* adjust type for bitmask shift to match mask variable type
2023-03-31 04:27:24 +00:00
616e0a21d8
add bluetooth mac address in dump_config() ( #4628 )
...
* add bluetooth mac address in dump_config()
* Update ble.cpp
* Update ble.cpp
* Update ble.cpp
* Update ble.cpp
* Update ble.cpp
* Update ble.cpp
* Update ble.cpp
2023-03-30 01:12:06 +00:00
a546ffd490
Add ifdef to new bt proxy unsubscribe ( #4634 )
...
* Add ifdef to new bt proxy unsubscribe
* Also add to subscribe message and wrap api conneciton code
* Format file
2023-03-30 01:08:51 +00:00
b5d0aede38
Remove AUTO_LOAD from as3935 ( #4630 )
2023-03-30 01:08:31 +00:00
a014d853a4
Synchronise Device Classes from Home Assistant ( #4633 )
...
* Synchronise Device Classes from Home Assistant
* Remove count do the `DEVICE_CLASSES` list is also updated
* Format file
---------
Co-authored-by: esphomebot <esphome@nabucasa.com >
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com >
2023-03-29 02:47:00 +00:00
c4ddf7697d
Update sync-device-classes.yml
2023-03-29 14:02:34 +13:00
a2931b6774
Add workflow to sync device classes with HA dev ( #4629 )
2023-03-28 23:31:07 +00:00
3ac7bf3761
EntityBase: Move ObjectId to Flash ( #4569 )
...
* Move EntityBase Object Id from memory to flash.
* Sprinkler use common `setup_entity` method.
* Remove `EntityBase` from Sprinkler.
* Support for entity names set to None
* change so gh PR picks up commit.
---------
Co-authored-by: Your Name <you@example.com >
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com >
2023-03-28 09:00:34 +00:00
922344811f
feat: Add support to unsubscribe from BLE advertisements ( #4620 )
...
* feat: Add support to unsubscribe from BLE advertisements
* Fix tests & clang
---------
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com >
2023-03-28 08:54:58 +00:00
cb2fcaa9b1
EntityBase Name can stay in flash. (#4594 )
...
* `EntityBase`can stay in flash.
* Trying to please the CI.
---------
Co-authored-by: Your Name <you@example.com >
2023-03-28 06:38:56 +00:00
1f50bd0649
Fix EzoCommandType enum ( #4593 )
...
* Fix EzoCommandType enum
Assign explicit value to EZO_CALIBRATION, and rescale all subsequent values.
* Remove enum values
---------
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com >
2023-03-27 22:08:26 +00:00
06f83bf1c0
Fix platform restriction for bme680_bsec ( #4616 )
...
* Fix platform restriction for bme680_bsec
* Fix
* revert spi change
* Add comment back
* Dont crash on rp2040 platform
2023-03-26 22:50:33 +00:00
c2756d57d8
Allow entity names to be set to None ( #4607 )
...
* Allow entity names to be set to None so they take on the device friendly_name automatically
* Use empty
2023-03-26 22:49:09 +00:00
56504692af
Lower range of CONF_FREQUENCY ( #4619 )
2023-03-26 22:48:17 +00:00
e542e75b9e
Require step to be set when calling register_number ( #4622 )
2023-03-26 22:44:56 +00:00
806e43c34c
SX1509 minimum loop period (fixes esphome/issues#4325) ( #4613 )
...
* Minimum loop period (fixes esphome/issues#4325 )
* clang-tidy suggestions
* More clang-tidy suggestions
2023-03-26 21:59:57 +00:00
29e7d00894
Bump actions/stale from 7 to 8 ( #4615 )
...
Bumps [actions/stale](https://github.com/actions/stale ) from 7 to 8.
- [Release notes](https://github.com/actions/stale/releases )
- [Changelog](https://github.com/actions/stale/blob/main/CHANGELOG.md )
- [Commits](https://github.com/actions/stale/compare/v7...v8 )
---
updated-dependencies:
- dependency-name: actions/stale
dependency-type: direct:production
update-type: version-update:semver-major
...
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2023-03-26 21:51:37 +00:00
9ee661c1e4
Add ability to clear the gatt cache ( #4621 )
...
* Add ability to clear the gatt cache
With BlueZ we can fully clear the cache when something goes wrong with the services, however since this is also a cache on the ESP32 we need to be able to clear the on device cache as well for the proxies since if something goes wrong with the service resolution it can cache the bad resolution on NVS forever.
Our current client implementation is limited to clearing the memory cache in Home Assistant https://github.com/home-assistant/core/blob/89355e087952417a6824507fd3b197f9d0520e19/homeassistant/components/esphome/bluetooth/client.py#L512
related issue https://github.com/esphome/issues/issues/4156
https://github.com/esphome/aioesphomeapi/pull/410
* naming
* lint
* lint
* naming
* naming
* naming
* 88 now that 87 is taken
* make const
* Update esphome/components/api/api_frame_helper.cpp
2023-03-26 21:48:56 +00:00
36c0e2416d
add select_schema to select component ( #4545 )
...
* add select_schema to select component
* add select_schema to select component
* fix cr
2023-03-26 20:01:35 +00:00
e4ba3ff1db
Limit range on filter time period for remote_receiver ( #4604 )
...
* Limit range on filter time period for remote_receiver
* pylint
2023-03-23 18:41:14 +00:00
be69b49880
Bump pytest-asyncio from 0.20.3 to 0.21.0 ( #4599 )
...
Bumps [pytest-asyncio](https://github.com/pytest-dev/pytest-asyncio ) from 0.20.3 to 0.21.0.
- [Release notes](https://github.com/pytest-dev/pytest-asyncio/releases )
- [Commits](https://github.com/pytest-dev/pytest-asyncio/compare/v0.20.3...v0.21.0 )
---
updated-dependencies:
- dependency-name: pytest-asyncio
dependency-type: direct:production
update-type: version-update:semver-minor
...
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2023-03-23 18:38:47 +00:00
cc317d27f5
Bump zeroconf from 0.47.3 to 0.47.4 ( #4597 )
...
Bumps [zeroconf](https://github.com/python-zeroconf/python-zeroconf ) from 0.47.3 to 0.47.4.
- [Release notes](https://github.com/python-zeroconf/python-zeroconf/releases )
- [Changelog](https://github.com/python-zeroconf/python-zeroconf/blob/master/CHANGELOG.md )
- [Commits](https://github.com/python-zeroconf/python-zeroconf/compare/0.47.3...0.47.4 )
---
updated-dependencies:
- dependency-name: zeroconf
dependency-type: direct:production
update-type: version-update:semver-patch
...
Signed-off-by: dependabot[bot] <support@github.com >
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2023-03-23 18:38:20 +00:00
c16709ed95
fix wrong port multiplexer name in dump GPIO function ( #4592 )
2023-03-23 18:37:40 +00:00
e13eaf6706
Fix animation resizing ( #4608 )
...
Animation resizing in RGB24 format is causing an error "Image cannot be resized to a bigger size". Other image types do not show the issue, and the only difference is the "image.thumbnail" call.
Removed the call and tested; the animation is shown with the desired size.
2023-03-22 08:05:09 +00:00
a1eb3b8475
Swap curly brackets for round on LockGuard ( #4610 )
2023-03-22 07:56:02 +00:00
d52e425ba2
Remove EntityBase from sprinkler ( #4606 )
...
* Remove EntityBase form sprinkler
* remove unneeded method
* Set name correctly
Move some timers to `setup` that rely on this->name_
* Fix SprinklerControllerSwitch setup
* Update esphome/components/sprinkler/__init__.py
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com >
---------
Co-authored-by: Samuel Sieb <samuel-github@sieb.net >
Co-authored-by: Keith Burzinski <kbx81x@gmail.com >
2023-03-22 07:35:16 +00:00
spacemanspiff2007