#pragma once

#include <cstdint>

namespace esphome {
namespace haier {
namespace hon_protocol {

enum class VerticalSwingMode : uint8_t {
  HEALTH_UP = 0x01,
  MAX_UP = 0x02,
  HEALTH_DOWN = 0x03,
  UP = 0x04,
  CENTER = 0x06,
  DOWN = 0x08,
  AUTO = 0x0C
};

enum class HorizontalSwingMode : uint8_t {
  CENTER = 0x00,
  MAX_LEFT = 0x03,
  LEFT = 0x04,
  RIGHT = 0x05,
  MAX_RIGHT = 0x06,
  AUTO = 0x07
};

enum class ConditioningMode : uint8_t {
  AUTO = 0x00,
  COOL = 0x01,
  DRY = 0x02,
  HEALTHY_DRY = 0x03,
  HEAT = 0x04,
  ENERGY_SAVING = 0x05,
  FAN = 0x06
};

enum class SpecialMode : uint8_t { NONE = 0x00, ELDERLY = 0x01, CHILDREN = 0x02, PREGNANT = 0x03 };

enum class FanMode : uint8_t { FAN_HIGH = 0x01, FAN_MID = 0x02, FAN_LOW = 0x03, FAN_AUTO = 0x05 };

struct HaierPacketControl {
  // Control bytes starts here
  // 10
  uint8_t set_point;  // Target temperature with 16°C offset (0x00 = 16°C)
  // 11
  uint8_t vertical_swing_mode : 4;  // See enum VerticalSwingMode
  uint8_t : 0;
  // 12
  uint8_t fan_mode : 3;      // See enum FanMode
  uint8_t special_mode : 2;  // See enum SpecialMode
  uint8_t ac_mode : 3;       // See enum ConditioningMode
  // 13
  uint8_t : 8;
  // 14
  uint8_t ten_degree : 1;           // 10 degree status
  uint8_t display_status : 1;       // If 0 disables AC's display
  uint8_t half_degree : 1;          // Use half degree
  uint8_t intelligence_status : 1;  // Intelligence status
  uint8_t pmv_status : 1;           // Comfort/PMV status
  uint8_t use_fahrenheit : 1;       // Use Fahrenheit instead of Celsius
  uint8_t : 1;
  uint8_t steri_clean : 1;
  // 15
  uint8_t ac_power : 1;                 // Is ac on or off
  uint8_t health_mode : 1;              // Health mode (negative ions) on or off
  uint8_t electric_heating_status : 1;  // Electric heating status
  uint8_t fast_mode : 1;                // Fast mode
  uint8_t quiet_mode : 1;               // Quiet mode
  uint8_t sleep_mode : 1;               // Sleep mode
  uint8_t lock_remote : 1;              // Disable remote
  uint8_t beeper_status : 1;  // If 1 disables AC's command feedback beeper (need to be set on every control command)
  // 16
  uint8_t target_humidity;  // Target humidity (0=30% .. 3C=90%, step = 1%)
  // 17
  uint8_t horizontal_swing_mode : 3;  // See enum HorizontalSwingMode
  uint8_t : 3;
  uint8_t human_sensing_status : 2;  // Human sensing status
  // 18
  uint8_t change_filter : 1;  // Filter need replacement
  uint8_t : 0;
  // 19
  uint8_t fresh_air_status : 1;       // Fresh air status
  uint8_t humidification_status : 1;  // Humidification status
  uint8_t pm2p5_cleaning_status : 1;  // PM2.5 cleaning status
  uint8_t ch2o_cleaning_status : 1;   // CH2O cleaning status
  uint8_t self_cleaning_status : 1;   // Self cleaning status
  uint8_t light_status : 1;           // Light status
  uint8_t energy_saving_status : 1;   // Energy saving status
  uint8_t cleaning_time_status : 1;   // Cleaning time (0 - accumulation, 1 - clear)
};

struct HaierPacketSensors {
  // 20
  uint8_t room_temperature;  // 0.5°C step
  // 21
  uint8_t room_humidity;  // 0%-100% with 1% step
  // 22
  uint8_t outdoor_temperature;  // 1°C step, -64°C offset (0=-64°C)
  // 23
  uint8_t pm2p5_level : 2;    // Indoor PM2.5 grade (00: Excellent, 01: good, 02: Medium, 03: Bad)
  uint8_t air_quality : 2;    // Air quality grade (00: Excellent, 01: good, 02: Medium, 03: Bad)
  uint8_t human_sensing : 2;  // Human presence result (00: N/A, 01: not detected, 02: One, 03: Multiple)
  uint8_t : 1;
  uint8_t ac_type : 1;  // 00 - Heat and cool, 01 - Cool only)
  // 24
  uint8_t error_status;  // See enum ErrorStatus
  // 25
  uint8_t operation_source : 2;   // who is controlling AC (00: Other, 01: Remote control, 02: Button, 03: ESP)
  uint8_t operation_mode_hk : 2;  // Homekit only, operation mode (00: Cool, 01: Dry, 02: Heat, 03: Fan)
  uint8_t : 3;
  uint8_t err_confirmation : 1;  // If 1 clear error status
  // 26
  uint16_t total_cleaning_time;  // Cleaning cumulative time (1h step)
  // 28
  uint16_t indoor_pm2p5_value;  // Indoor PM2.5 value (0 ug/m3 -  4095 ug/m3, 1 ug/m3 step)
  // 30
  uint16_t outdoor_pm2p5_value;  // Outdoor PM2.5 value (0 ug/m3 -  4095 ug/m3, 1 ug/m3 step)
  // 32
  uint16_t ch2o_value;  // Formaldehyde value (0 ug/m3 -  10000 ug/m3, 1 ug/m3 step)
  // 34
  uint16_t voc_value;  // VOC value (Volatile Organic Compounds) (0 ug/m3 -  1023 ug/m3, 1 ug/m3 step)
  // 36
  uint16_t co2_value;  // CO2 value (0 PPM -  10000 PPM, 1 PPM step)
};

struct HaierStatus {
  uint16_t subcommand;
  HaierPacketControl control;
  HaierPacketSensors sensors;
};

struct DeviceVersionAnswer {
  char protocol_version[8];
  char software_version[8];
  uint8_t encryption[3];
  char hardware_version[8];
  uint8_t : 8;
  char device_name[8];
  uint8_t functions[2];
};

// In this section comments:
//  - module is the ESP32 control module (communication module in Haier protocol document)
//  - device is the conditioner control board (network appliances in Haier protocol document)
enum class FrameType : uint8_t {
  CONTROL = 0x01,  // Requests or sets one or multiple parameters (module <-> device, required)
  STATUS = 0x02,   // Contains one or multiple parameters values, usually answer to control frame (module <-> device,
                   // required)
  INVALID = 0x03,  // Communication error indication (module <-> device, required)
  ALARM_STATUS = 0x04,  // Alarm status report (module <-> device, interactive, required)
  CONFIRM = 0x05,  // Acknowledgment, usually used to confirm reception of frame if there is no special answer (module
                   // <-> device, required)
  REPORT = 0x06,   // Report frame (module <-> device, interactive, required)
  STOP_FAULT_ALARM = 0x09,             // Stop fault alarm frame (module -> device, interactive, required)
  SYSTEM_DOWNLINK = 0x11,              // System downlink frame (module -> device, optional)
  DEVICE_UPLINK = 0x12,                // Device uplink frame (module <- device , interactive, optional)
  SYSTEM_QUERY = 0x13,                 // System query frame (module -> device, optional)
  SYSTEM_QUERY_RESPONSE = 0x14,        // System query response frame (module <- device , optional)
  DEVICE_QUERY = 0x15,                 // Device query frame (module <- device, optional)
  DEVICE_QUERY_RESPONSE = 0x16,        // Device query response frame (module -> device, optional)
  GROUP_COMMAND = 0x60,                // Group command frame (module -> device, interactive, optional)
  GET_DEVICE_VERSION = 0x61,           // Requests device version (module -> device, required)
  GET_DEVICE_VERSION_RESPONSE = 0x62,  // Device version answer (module <- device, required_
  GET_ALL_ADDRESSES = 0x67,            // Requests all devices addresses (module -> device, interactive, optional)
  GET_ALL_ADDRESSES_RESPONSE =
      0x68,  // Answer to request of all devices addresses (module <- device , interactive, optional)
  HANDSET_CHANGE_NOTIFICATION = 0x69,  // Handset change notification frame (module <- device , interactive, optional)
  GET_DEVICE_ID = 0x70,                // Requests Device ID (module -> device, required)
  GET_DEVICE_ID_RESPONSE = 0x71,       // Response to device ID request (module <- device , required)
  GET_ALARM_STATUS = 0x73,             // Alarm status request (module -> device, required)
  GET_ALARM_STATUS_RESPONSE = 0x74,    // Response to alarm status request (module <- device, required)
  GET_DEVICE_CONFIGURATION = 0x7C,     // Requests device configuration (module -> device, interactive, required)
  GET_DEVICE_CONFIGURATION_RESPONSE =
      0x7D,  // Response to device configuration request (module <- device, interactive, required)
  DOWNLINK_TRANSPARENT_TRANSMISSION = 0x8C,  // Downlink transparent transmission (proxy data Haier cloud -> device)
                                             // (module -> device, interactive, optional)
  UPLINK_TRANSPARENT_TRANSMISSION = 0x8D,  // Uplink transparent transmission (proxy data device -> Haier cloud) (module
                                           // <- device, interactive, optional)
  START_DEVICE_UPGRADE = 0xE1,             // Initiate device OTA upgrade (module -> device, OTA required)
  START_DEVICE_UPGRADE_RESPONSE = 0xE2,  // Response to initiate device upgrade command (module <- device, OTA required)
  GET_FIRMWARE_CONTENT = 0xE5,           // Requests to send firmware (module <- device, OTA required)
  GET_FIRMWARE_CONTENT_RESPONSE =
      0xE6,                 // Response to send firmware request (module -> device, OTA required) (multipacket?)
  CHANGE_BAUD_RATE = 0xE7,  // Requests to change port baud rate (module <- device, OTA required)
  CHANGE_BAUD_RATE_RESPONSE = 0xE8,    // Response to change port baud rate request (module -> device, OTA required)
  GET_SUBBOARD_INFO = 0xE9,            // Requests subboard information (module -> device, required)
  GET_SUBBOARD_INFO_RESPONSE = 0xEA,   // Response to subboard information request (module <- device, required)
  GET_HARDWARE_INFO = 0xEB,            // Requests information about device and subboard (module -> device, required)
  GET_HARDWARE_INFO_RESPONSE = 0xEC,   // Response to hardware information request (module <- device, required)
  GET_UPGRADE_RESULT = 0xED,           // Requests result of the firmware update (module <- device, OTA required)
  GET_UPGRADE_RESULT_RESPONSE = 0xEF,  // Response to firmware update results request (module -> device, OTA required)
  GET_NETWORK_STATUS = 0xF0,           // Requests network status (module <- device, interactive, optional)
  GET_NETWORK_STATUS_RESPONSE = 0xF1,  // Response to network status request (module -> device, interactive, optional)
  START_WIFI_CONFIGURATION = 0xF2,     // Starts WiFi configuration procedure (module <- device, interactive, required)
  START_WIFI_CONFIGURATION_RESPONSE =
      0xF3,  // Response to start WiFi configuration request (module -> device, interactive, required)
  STOP_WIFI_CONFIGURATION = 0xF4,  // Stop WiFi configuration procedure (module <- device, interactive, required)
  STOP_WIFI_CONFIGURATION_RESPONSE =
      0xF5,  // Response to stop WiFi configuration request (module -> device, interactive, required)
  REPORT_NETWORK_STATUS = 0xF7,  // Reports network status (module -> device, required)
  CLEAR_CONFIGURATION = 0xF8,    // Request to clear module configuration (module <- device, interactive, optional)
  BIG_DATA_REPORT_CONFIGURATION =
      0xFA,  // Configuration for autoreport device full status (module -> device, interactive, optional)
  BIG_DATA_REPORT_CONFIGURATION_RESPONSE =
      0xFB,  // Response to set big data configuration (module <- device, interactive, optional)
  GET_MANAGEMENT_INFORMATION = 0xFC,  // Request management information from device (module -> device, required)
  GET_MANAGEMENT_INFORMATION_RESPONSE =
      0xFD,        // Response to management information request (module <- device, required)
  WAKE_UP = 0xFE,  // Request to wake up (module <-> device, optional)
};

enum class SubcommandsControl : uint16_t {
  GET_PARAMETERS = 0x4C01,  // Request specific parameters (packet content: parameter ID1 + parameter ID2 + ...)
  GET_USER_DATA = 0x4D01,   // Request all user data from device (packet content: None)
  GET_BIG_DATA = 0x4DFE,    // Request big data information from device (packet content: None)
  SET_PARAMETERS = 0x5C01,  // Set parameters of the device and device return parameters (packet content: parameter ID1
                            // + parameter data1 + parameter ID2 + parameter data 2 + ...)
  SET_SINGLE_PARAMETER = 0x5D00,  // Set single parameter (0x5DXX second byte define parameter ID) and return all user
                                  // data (packet content: ???)
  SET_GROUP_PARAMETERS = 0x6001,  // Set group parameters to device (0x60XX second byte define parameter is group ID,
                                  // the only group mentioned in document is 1) and return all user data (packet
                                  // content: all values like in status packet)
};

}  // namespace hon_protocol
}  // namespace haier
}  // namespace esphome