* WIP: Advanced commands for portisch firmware
* Fix string code sending
* clang formatting
* Add new rf_bridge functions to test
* Add advanced code received trigger
* Fix copy-paste mistake in the advanced sending
* Fix log message to be consistent
* clang
* Remove extra +
* fix: FastLED SPI_DATA_RATE being truncated to 8 bits
FastLED expects SPI_DATA_RATE as an uint32_t, but we had it as uint8_t.
Fix that to avoid the data rate being truncated.
* fastled: allow specifying data rate
Previously, we've just taken the default data rate from FastLED.
However, that does not always work properly. In my case, I had a
slow level shifter that couldn't keep up with the 1 MHz data
rate default for WS2801. Long cabling might also be a reason why
one might want to reduce the data rate.
This will add a new optional "data_rate" config option where one
may specify the desired data rate as a frequency:
light:
- platform: fastled_spi
chipset: WS2801
data_pin: GPIO23
clock_pin: GPIO22
data_rate: 500kHz
num_leds: 178
* Started to work on packages feature
* Added some more validation to packages config
* Fixed some linter warnings
* Updated tests
* Reordered consts to avoid linter error
* Reordered consts to avoid linter error
* Refactored test yaml files to integrate into existing test pipeline
Co-authored-by: Dmitry Berezovsky <dmitry.berezovsky@logicify.com>
* Start support for tuya climate devices
* Add tuya climate to test4
* Fix lint and cast
* Remove blank line
* Try to display accurate action based on observed behaviour.
* Fix action when in off mode
* Improve config dump
* merge use of CONF_SWITCH_DATAPOINT
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
* TFT-LCD ST7789V of ESP32 TTGO.
This patch allows you to use TFT-LCD ST7789V of ESP32 TTGO
* Lots of polish and a few tweaks
* Add test
* Add color to core, take 1
* Where did those tabs come from?
* Fix lines too long
* Added color component
* Linted
* Rebase, SPI fix, test
* Shuffle bits
* One more thing...oops
* Image type fix...oops
* Make display_buffer use Color
* Fix BGR/RGB, remove predefined colors
* Fix all the things
* renamed colors to color
* migrate max7219
Co-authored-by: musk95 <musk95@naver.com>
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
* Add fan support to bang bang controller
* Fix heat-only and cool-only modes
* Added support for all climate actions and modes
* Fix up some comments
* Fan_only mode behavior tweak
* Updated test
* Updated test, take 2
* Add accessor methods for easier use in lambadas
* Revert "Add accessor methods for easier use in lambadas"
This reverts commit f15713129cd5587242a08ad1e2ee37cbf075aa03.
Don't code late at night when sleepy.
* Fix single/dual setpoint support
* Linted
* Properly implement single-point, validation improvements
* Another quick fix...sigh
* Update tests
* Update tests, take 2
* Revert "Update tests, take 2"
This reverts commit 71bb7fccc53d95a7d221e80ea0a931fb3cfd9a0c.
Nope.
* Revert "Update tests"
This reverts commit 42044291efaaf09858f29ab27bbc3aa9e8b80ee9.
Nope 2.
* Updated/fixed tests
* Revert "Updated/fixed tests"
This reverts commit a1a5b1c7db9a240b9da668b6e48abe1dd7910777.
Taking a different approach.
* Revert "Another quick fix...sigh"
This reverts commit 6b1955724a2de3c2d1534ec206dd5794bbb5f568.
Taking a different approach.
* Revert "Properly implement single-point, validation improvements"
This reverts commit f5bfff099e1dc58edd3898da8655c147adde2301.
Taking a different approach.
* Single/dual set point fixes, full validation
* Fix test
* Fix restore-on-boot, clean up comments
* Decouple two-point/auto operation, more polish
* One last away mode tweak
* Added set point validation
* Clean up over-publishing, always call action after boot
* Add fan support to bang bang controller
* Fix heat-only and cool-only modes
* Added support for all climate actions and modes
* Fix up some comments
* Fan_only mode behavior tweak
* Updated test
* Updated test, take 2
* Add accessor methods for easier use in lambadas
* Revert "Add accessor methods for easier use in lambadas"
This reverts commit f15713129cd5587242a08ad1e2ee37cbf075aa03.
Don't code late at night when sleepy.
* Fix single/dual setpoint support
* Linted
* Properly implement single-point, validation improvements
* Another quick fix...sigh
* Update tests
* Update tests, take 2
* Revert "Update tests, take 2"
This reverts commit 71bb7fccc53d95a7d221e80ea0a931fb3cfd9a0c.
Nope.
* Revert "Update tests"
This reverts commit 42044291efaaf09858f29ab27bbc3aa9e8b80ee9.
Nope 2.
* Updated/fixed tests
* Revert "Updated/fixed tests"
This reverts commit a1a5b1c7db9a240b9da668b6e48abe1dd7910777.
Taking a different approach.
* Revert "Another quick fix...sigh"
This reverts commit 6b1955724a2de3c2d1534ec206dd5794bbb5f568.
Taking a different approach.
* Revert "Properly implement single-point, validation improvements"
This reverts commit f5bfff099e1dc58edd3898da8655c147adde2301.
Taking a different approach.
* Single/dual set point fixes, full validation
* Fix test
* Fix restore-on-boot, clean up comments
* Decouple two-point/auto operation, more polish
* One last away mode tweak
* Added set point validation
* Clean up over-publishing, always call action after boot
* Added refresh() function to allow easy on-device state refreshing
* Fix fan oscillation trait not being used
* Add fan direction support to SpeedFan
* Add fan direction to API
* Add fan direction support to BinaryFan
* Fix CI errors
* Fix python format
* Change some ordering to trigger CI
* Add test for the configuration
* Extend `uart:` with `rx_buffer_size:`
This allows to configure `rx_buffer_size:`
to efficiently receive big payloads over UART
* lint
* remove old default value
* add test
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
* esp32_ble_tracker: introduce UUID comparison function
* ble_presence, ble_rssi: use new UUID comparison function
* esp32_ble_tracker: introduce automation on BLE advertising
* test2.yaml: remove deep_sleep due to firmware size restrictions
* add new config options
* init variables in code
* load css and js in python
* update print inside webserver
* fix indentation
* fix indentation
* indentation fix
* fix condition in init
* use cv.file_ instead of cv.string
* do not import EsphomeError
* support embedding js and css at the same time as defined in url
* handle css as separate page
* handle js as separate page
* fix copy and paste error
* Add support for Sensirion SPS30 Particulate Matter sensors
* Remove blocking of the main thread on initialization;
Improve wording on the debug messages;
Add robustness in re-initialization of reconnected or replaced sensors;
* Fix code formatting;
Co-authored-by: Nad <valordk@github>
* implemented ruuvi_ble and ruuvitag with RAWv1 protocol
fixesesphome/feature-requests#313
* lint
* updated data calculations
* cpp lint
* use string directly in message
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* add RAWv2 protocol support
* fix ICON_SIGNAL
* typo
* calculation correction and cleaning
* c++ lint
* added acceleration and fixed typo
* removed remote_receiver to reduce firmware size
remote_receiver also in test1.yaml
Jesse Hills