Animation resizing in RGB24 format is causing an error "Image cannot be resized to a bigger size". Other image types do not show the issue, and the only difference is the "image.thumbnail" call.
Removed the call and tested; the animation is shown with the desired size.
* Remove EntityBase form sprinkler
* remove unneeded method
* Set name correctly
Move some timers to `setup` that rely on this->name_
* Fix SprinklerControllerSwitch setup
* Update esphome/components/sprinkler/__init__.py
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
---------
Co-authored-by: Samuel Sieb <samuel-github@sieb.net>
Co-authored-by: Keith Burzinski <kbx81x@gmail.com>
* Add a simple 'skip' filter
This filter simply skips the first `send_first_at` values, then passes
everything as-is. This is quite useful when you know the first few sensor
readings should be ignored.
Example YAML:
```yaml
sensor:
- platform: sgp30
id: mysensor_sgp30
eco2:
id: mysensor_sgp30_co2
name: "eCO₂"
accuracy_decimals: 0
filters:
- skip:
send_first_at: 41
```
* Rename the filter to `skip_initial` and simplify the schema
New usage:
```yaml
filters:
- skip_initial: 41
```
* Apply clang-format
* Added missing PM_1_0 and PM_10_0 for PMS5003T
Added missing PM_1_0 and PM_10_0 for PMS5003T
* Revert "Added missing PM_1_0 and PM_10_0 for PMS5003T"
This reverts commit 86084f7c610bbecbcf123544297a670b91eead1d.
* Added tests for PMS5003T
* Added missing PM_1_0 and PM_10_0 for PMS5003T PMS5003ST
* Added missing PM_1_0 and PM_10_0 for PMS5003T
* lint: Trailing whitespace fixed
* tab character removed
* Clang format suggested edit
* fixing rectangle's `shrink` and `extend`
* fixed the rect::shrink and rect::inside methods
and added rect:equal() method
* fixed internal clang issue again. When would is
this going to be fixed :(
* fixed internal clang issue again. When would is
this going to be fixed :(
* remove trailing space
* enable the psram on esp32 and allow big screen
* update CODEOWNERS
* small update
* update CODEOWNERS again.
* Removed the M5STACK because it is a ESP32 device.
* i removed the wrong model
* update the error message.
* Feat: add support for hex color in color component
* Chore: move hex color validator to color component
* Chore: add test
* Chore: fix formatting
* Chore: make linter happy
* Chore: make linter happy
* Fix: parse correct offsets
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Chore: use cv.Invalid
* Fix: remove # because it indicates a comment in yaml
* Fix: only allow hex if no other color value is set
* Fix: tests
* Fix: mutual exclusion of raw and hex colors
* Chore: format file
* Update __init__.py
---------
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Fix missing data array
* Fix incorrect bit offset
* Correct variable types
* Do same conversions as in original library
* Correct clang-format
* Move out float conversion for clarity
* Added check for heater stability
* Correct clang format
* Allow reporting gas resistance when heater is disabled
* Correct clang format
* Better error reporting by @DAVe3283
* Correct signed operation, range switching error was positive all the time
* - Removed cleaning the screen twice.
\Should be handled by `DisplayBuffer::init_internal_();`
- Made ili9341::initalize() protected and renamed
\ it to ili9341::initalize().
- ili9341::initalize() should only init the display
\ and set the width and heigth.
* removed to much
* clang format fixes
* removing trailing underscors for
protected virtual methods
* removed the "override" on display()
* clang fixes
* restored old changes
* Renamed the ili9341 platform to ili9xxx and added
multiple drivers as well. including PR #3848
* fixed most of the clang reported issues
* fixed reported issues
* last fixes
* Setting the right codeowners
* missing changes
* fixed naming Display() method.
* clang again
* clang fix
* fixes reported by @jesserockz & @gpambrozio
* a change to display.py removing an unneeded var
* re-introduce **backlight** option.
* update the ili9488 initialization
* update the ili9488 initialization and fix typo
* fixed typo
* add missing constants
* swap height and width back for the ili9488
* init fixes ili9488
* fixed lint issue
testing the init code
* oeps
* init fixes ili9488
* fixed wrong define
* fixed wrong define again
* removed some spaces
* revert to ili9341
* Remove parts that where used for
the switchplate
* lint fixes and removing unused function
* fix error and introducing 16bit color option
* fix error and introducing 16bit color option
* fix clang issue
* clang fix
* clang issue again
* is this what clang exprect
* clang fix
* clang fix
* try again
* let try again
* and again
* and the last clang fix
* remove the need of wifi
* update dimentions
* update ili8488 init code.
* update dimentions
* allow to change height and width
* dump color mode config
* fix
* fix
* modify logging
* referd back unrelated change
* code formatting commit and moving functions around
* add missing ;
* update code
* update code
* use the correct write_array for sending uint16_t
* fix panic loop
* fix panic loop
* - update the test file
- fixed sending display data
* clang fixes
* clang fixes
* clang fixes again
* remove .gitignore items
* remove .gitignore items
* make sure Update() can can not be called while
called
* clang correction
* adding a test yaml for the ili9341
* Update ili9341 example
* Make test ili9xxx/tests only local
* restore back old ili9341 driver code
* Add a new config for the M5Core
* fix clang request
* reverd to restore of the old ili9341
there is no proper way to say it is depricated.
* Remove the backlight/led pin from the config.
You need to use a proper light platform component
* Ili9488init changes (#88)
Fixed ILI9488 init settings, and adjusted pixel handling code to push pixels in 18 bit format.
This does not change the internal 16-bit representation.
* fixed some leftover clang issues from the merge.
* fixed the slang-tidy request.
* remove `backlight_pin` warning.
---------
Co-authored-by: JD Steffen <jdsteffen81@gmail.com>
* remove unused sensors on pzemdc
* add reset energy action for pzemdc
* fix lint errors
* remove trailing space on pzemdc.h
* make method reset_energy of pzemdc public
* Apply suggestions from code review
---------
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Use PSRam for BLE scan results.
* Format Document
* Use generic define `CONFIG_SPIRAM`.
* Formatting changes.
* Memory allocation is allowed to fail.
* Use mark_failed instead of abort.
---------
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Add support for AS7341 spectral color sensor.
* Run clang-format and clang-tidy.
* Post-review changes.
* Apply suggestions from code review
---------
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Add delay between clock changes on sn74hc165
* Increase to 10us
* Add another delay after clock low
* Print input bits every second
* Fix pin order
* Remove log
* Fix for inverted pins
* formatting
* Add initial support for multiple devices
Re-introduce support for multiple I2C devices (it was suppressed in https://github.com/trvrnrth/esphome-bsec-bme680/commit/df37a7635f6acc3f7520f257d2645eda10b863a5). Devices are identified by their I2C address, and the BME680 can only have the 0x76 or 0x77 address, so this adds support for a maximum of two devices.
* Reintegrate commit ebf13a0b
Reintegrate commit https://github.com/esphome/esphome/commit/ebf13a0ba0a48453c2cc80bfc942d6a588859233 which was lost in my changes (I were working on old files)
* wrong commit
* wrong commit
* Reintegrate commit ebf13a0b
Reintegrate commit https://github.com/esphome/esphome/commit/ebf13a0ba0a48453c2cc80bfc942d6a588859233 which was lost due to me working on old files
* Reintroduce newlines at end of files
* Reintroduce newlines at end of files
* Adhere to codebase standards
Obey the "All uses of class members and member functions should be prefixed with this-> to distinguish them from global functions in code review" rule of the Codebase Standards
* Fix formatting according to clang-format
* Perform the BSEC library reinitialization+snapshot only when more than one device is present
* Fix formatting according to clang-format
* Degrade abort message in restore_state_() from warning to verbose
This always happen at initial setup, so it's not a really useful message; when some real problems arise, we'll have a more useful warning from snapshot_state_()
Co-authored-by: Trevor North <trevor@freedisc.co.uk>
* Reduce peak stack usage to avoid bootloops on ESP8266
Achieved mainly by moving the work_buffer needed by the BSEC library to the heap, as a single global work buffer shared by all instances.
::set_config_ has been reverted to a code path similar to the original, as that reduces peak stack usage enough to be OK on ESP8266 even without moving the work_buffer to the heap.
* Fix formatting according to clang-format
* Add support for devices with the same i2c address
Devices are now identified using their index in the BME680BSECComponent::instances member, which became a vector. This allows adding two devices with the same i2c address (which should be placed on different i2c buses). Since a BME680 can only have an address of 0x76 or 0x77, a maximum of 2 devices could be added before this commit. Now there is no theoretical limit on the number of devices which could be added.
* Fix formatting according to clang-format
* Fix formatting according to clang-format
---------
Co-authored-by: Trevor North <trevor@freedisc.co.uk>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Jesse Hills