Add validate to components (#1631)

Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>

esphome/components/cse7766/sensor.py

@@ -59,3 +59,9 @@ async def to_code(config):
         conf = config[CONF_POWER]
         sens = await sensor.new_sensor(conf)
         cg.add(var.set_power_sensor(sens))
+
+
+def validate(config, item_config):
+    uart.validate_device(
+        "cse7766", config, item_config, baud_rate=4800, require_tx=False
+    )

esphome/components/dfplayer/__init__.py

@@ -78,6 +78,12 @@ async def to_code(config):
         await automation.build_automation(trigger, [], conf)
 
 
+def validate(config, item_config):
+    uart.validate_device(
+        "dfplayer", config, item_config, baud_rate=9600, require_rx=False
+    )
+
+
 @automation.register_action(
     "dfplayer.play_next",
     NextAction,

esphome/components/ethernet/__init__.py

@@ -59,7 +59,7 @@ IPAddress = cg.global_ns.class_("IPAddress")
 ManualIP = ethernet_ns.struct("ManualIP")
 
 
-def validate(config):
+def _validate(config):
     if CONF_USE_ADDRESS not in config:
         if CONF_MANUAL_IP in config:
             use_address = str(config[CONF_MANUAL_IP][CONF_STATIC_IP])
@@ -90,7 +90,7 @@ CONFIG_SCHEMA = cv.All(
             ),
         }
     ).extend(cv.COMPONENT_SCHEMA),
-    validate,
+    _validate,
 )
 
 

esphome/components/fastled_clockless/light.py

@@ -34,7 +34,7 @@ CHIPSETS = [
 ]
 
 
-def validate(value):
+def _validate(value):
     if value[CONF_CHIPSET] == "NEOPIXEL" and CONF_RGB_ORDER in value:
         raise cv.Invalid("NEOPIXEL doesn't support RGB order")
     return value
@@ -47,7 +47,7 @@ CONFIG_SCHEMA = cv.All(
             cv.Required(CONF_PIN): pins.output_pin,
         }
     ),
-    validate,
+    _validate,
 )
 
 

esphome/components/gps/__init__.py

@@ -89,3 +89,7 @@ async def to_code(config):
 
     # https://platformio.org/lib/show/1655/TinyGPSPlus
     cg.add_library("1655", "1.0.2")  # TinyGPSPlus, has name conflict
+
+
+def validate(config, item_config):
+    uart.validate_device("gps", config, item_config, require_tx=False)

esphome/components/hm3301/sensor.py

@@ -29,7 +29,7 @@ AQI_CALCULATION_TYPE = {
 }
 
 
-def validate(config):
+def _validate(config):
     if CONF_AQI in config and CONF_PM_2_5 not in config:
         raise cv.Invalid("AQI sensor requires PM 2.5")
     if CONF_AQI in config and CONF_PM_10_0 not in config:
@@ -72,7 +72,7 @@ CONFIG_SCHEMA = cv.All(
     )
     .extend(cv.polling_component_schema("60s"))
     .extend(i2c.i2c_device_schema(0x40)),
-    validate,
+    _validate,
 )
 
 

esphome/components/neopixelbus/light.py

@@ -150,7 +150,7 @@ def format_method(config):
     raise NotImplementedError
 
 
-def validate(config):
+def _validate(config):
     if CONF_PIN in config:
         if CONF_CLOCK_PIN in config or CONF_DATA_PIN in config:
             raise cv.Invalid("Cannot specify both 'pin' and 'clock_pin'+'data_pin'")
@@ -176,7 +176,7 @@ CONFIG_SCHEMA = cv.All(
             cv.Required(CONF_NUM_LEDS): cv.positive_not_null_int,
         }
     ).extend(cv.COMPONENT_SCHEMA),
-    validate,
+    _validate,
     validate_method_pin,
 )
 

esphome/components/rc522_spi/__init__.py

@@ -24,3 +24,8 @@ async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])
     await rc522.setup_rc522(var, config)
     await spi.register_spi_device(var, config)
+
+
+def validate(config, item_config):
+    # validate given SPI hub is suitable for rc522_spi, it needs both miso and mosi
+    spi.validate_device("rc522_spi", config, item_config, True, True)

esphome/components/rtttl/__init__.py

@@ -1,8 +1,11 @@
+import logging
 import esphome.codegen as cg
 import esphome.config_validation as cv
 from esphome import automation
 from esphome.components.output import FloatOutput
-from esphome.const import CONF_ID, CONF_OUTPUT, CONF_TRIGGER_ID
+from esphome.const import CONF_ID, CONF_OUTPUT, CONF_PLATFORM, CONF_TRIGGER_ID
+
+_LOGGER = logging.getLogger(__name__)
 
 CODEOWNERS = ["@glmnet"]
 CONF_RTTTL = "rtttl"
@@ -33,6 +36,33 @@ CONFIG_SCHEMA = cv.Schema(
 ).extend(cv.COMPONENT_SCHEMA)
 
 
+def validate(config, item_config):
+    # Not adding this to FloatOutput as this is the only component which needs `update_frequency`
+
+    parent_config = config.get_config_by_id(item_config[CONF_OUTPUT])
+    platform = parent_config[CONF_PLATFORM]
+
+    PWM_GOOD = ["esp8266_pwm", "ledc"]
+    PWM_BAD = [
+        "ac_dimmer ",
+        "esp32_dac",
+        "slow_pwm",
+        "mcp4725",
+        "pca9685",
+        "tlc59208f",
+        "my9231",
+        "sm16716",
+    ]
+
+    if platform in PWM_BAD:
+        raise ValueError(f"Component rtttl cannot use {platform} as output component")
+
+    if platform not in PWM_GOOD:
+        _LOGGER.warning(
+            "Component rtttl is not known to work with the selected output type. Make sure this output supports custom frequency output method."
+        )
+
+
 async def to_code(config):
     var = cg.new_Pvariable(config[CONF_ID])
     await cg.register_component(var, config)

esphome/components/sim800l/__init__.py

@@ -54,6 +54,10 @@ async def to_code(config):
         )
 
 
+def validate(config, item_config):
+    uart.validate_device("sim800l", config, item_config, baud_rate=9600)
+
+
 SIM800L_SEND_SMS_SCHEMA = cv.Schema(
     {
         cv.GenerateID(): cv.use_id(Sim800LComponent),

esphome/components/spi/__init__.py

@@ -67,3 +67,11 @@ async def register_spi_device(var, config):
     if CONF_CS_PIN in config:
         pin = await cg.gpio_pin_expression(config[CONF_CS_PIN])
         cg.add(var.set_cs_pin(pin))
+
+
+def validate_device(name, config, item_config, require_mosi, require_miso):
+    spi_config = config.get_config_by_id(item_config[CONF_SPI_ID])
+    if require_mosi and CONF_MISO_PIN not in spi_config:
+        raise ValueError(f"Component {name} requires parent spi to declare miso_pin")
+    if require_miso and CONF_MOSI_PIN not in spi_config:
+        raise ValueError(f"Component {name} requires parent spi to declare mosi_pin")

esphome/components/uart/__init__.py

@@ -92,6 +92,42 @@ async def to_code(config):
     cg.add(var.set_parity(config[CONF_PARITY]))
 
 
+def validate_device(
+    name, config, item_config, baud_rate=None, require_tx=True, require_rx=True
+):
+    if not hasattr(config, "uart_devices"):
+        config.uart_devices = {}
+    devices = config.uart_devices
+
+    uart_config = config.get_config_by_id(item_config[CONF_UART_ID])
+
+    uart_id = uart_config[CONF_ID]
+    device = devices.setdefault(uart_id, {})
+
+    if require_tx:
+        if CONF_TX_PIN not in uart_config:
+            raise ValueError(f"Component {name} requires parent uart to declare tx_pin")
+        if CONF_TX_PIN in device:
+            raise ValueError(
+                f"Component {name} cannot use the same uart.{CONF_TX_PIN} as component {device[CONF_TX_PIN]} is already using it"
+            )
+        device[CONF_TX_PIN] = name
+
+    if require_rx:
+        if CONF_RX_PIN not in uart_config:
+            raise ValueError(f"Component {name} requires parent uart to declare rx_pin")
+        if CONF_RX_PIN in device:
+            raise ValueError(
+                f"Component {name} cannot use the same uart.{CONF_RX_PIN} as component {device[CONF_RX_PIN]} is already using it"
+            )
+        device[CONF_RX_PIN] = name
+
+    if baud_rate and uart_config[CONF_BAUD_RATE] != baud_rate:
+        raise ValueError(
+            f"Component {name} requires parent uart baud rate be {baud_rate}"
+        )
+
+
 # A schema to use for all UART devices, all UART integrations must extend this!
 UART_DEVICE_SCHEMA = cv.Schema(
     {

esphome/components/wifi/__init__.py

@@ -137,7 +137,7 @@ WIFI_NETWORK_STA = WIFI_NETWORK_BASE.extend(
 )
 
 
-def validate(config):
+def _validate(config):
     if CONF_PASSWORD in config and CONF_SSID not in config:
         raise cv.Invalid("Cannot have WiFi password without SSID!")
 
@@ -207,7 +207,7 @@ CONFIG_SCHEMA = cv.All(
             ),
         }
     ),
-    validate,
+    _validate,
 )